LD type 5-ton single-girder overhead crane parameter table

LD type 5-ton single-girder overhead crane

The LD type 5-ton electric single-girder bridge crane (hereinafter referred to as the 5-ton single-girder crane) is designed and manufactured according to the standard JB/T1306-94. The 5-ton electric single-girder crane is used with CDI, MDI and other forms of electric hoists to become A light and small crane running on rails, with a lifting capacity of 5 tons and an applicable span of 7.5-22.5 meters. The working environment temperature is in the range of -25-+40℃.

LD type 5-ton single-girder overhead crane

5 ton single beam crane structure diagram

5 ton single beam crane structure diagram

Technical parameters of 5 ton single girder crane

 crane operating mechanismWorking speed (m/min)(ground)20(ground) 30(room)
speed ratio58.7839.3826.36
 motortypeYSE80₂-4YSE90L-47DB100-4
Power (Kw) 2×0.82×1.52×1.5
Rotational speed (r/min)1380
Lifting mechanism (electric hoist) and electric hoist operating mechanism Model of electric hoistMD, type modeCD, model
Lifting speed(m/min)8/0.8(7/0.78(7)
Lifting height H(m)6、9、12、18、24、30
Traveling speed (m/min)20
electric motorCone squirrel-cage 
model
Working classA3
power supply380V 50Hz three-phase
width of trail37~70mm
Liftingweight(t)Span(m)Crane mass (t)Maximum wheel pressure (KN)Minimum wheel pressure (KN)Basic Dimensions (mm)
H₁H₂H₃B₀C₁C₂B
        57.52.5435.84.2  580  1380  720  2500        841.5        1310  2000
82.6035.94.3
8.52.6536.04.4
92.7136.24.6
9.52.7736.34.7
102.8236.54.9
10.52.8836.65.0
112.9136.75.1
11.53.3537.86.2  660  1400  810  2500  2000
123.4238.06.4
12.53.5238.36.7
133.6138.56.9
13.53.6738.77.1
143.7438.97.3
14.54.0939.88.2  785  1415  910  3000  2500
154.1940.08.4
15.54.2740.28.6
164.3440.48.8
16.54.4240.69.0
174.5240.89.2
19.55.1542.310.78201440101030002500
22.56.0545.013.48751485111035003000

Still have questions?

Leave a request and our managers will contact you shortly.




    Send Your Needs