The LD type 10-ton electric single-girder bridge crane (hereinafter referred to as the 10-ton single-girder crane) is designed and manufactured according to the standard JB/T1306-94. The 10-ton electric single-girder crane is used with CDI, MDI and other forms of electric hoists to become A light and small crane running on rails, with a lifting capacity of 10 tons and an applicable span of 7.5-22.5 meters. The working environment temperature is in the range of -25-+40℃.

10 ton single girder overhead crane structure diagram

Technical Parameters of 10 Ton Single Girder Crane

crane travelling mechanism	Working speed (m/min)		(ground)20	(ground) 30		(room)
	speed ratio		58.78	39.38		26.36
	motor	type	YSE80₂-4	YSE90L-4		ZDR100-4
		Power(Kw)	2×0.8	2×1.5		2×1.5
		Rotational speed (r/min)	1380
Lifting mechanism (electric hoist) and electric hoist operating mechanism	Model of electric hoist		MD, model		CD, model
	Lifting speed (m/min)		8/0.8(7/0.7)		8(7)
	Lifting height H(m)		6、9、12、18、24、30
	Traveling speed (m/min)		20
	electric motor		Cone squirrel-cage mode
Working class			A3
power supply			380V 50Hz three-phase
width of trai			37~70mm

Lifting weight(t)	Span(m)	Crane total weight (t)	Maximum wheel pressure (KN)	Minimum wheel pressure (KN)	Basic Dimensions (mm)
					H₁	H₂	H₃	B₀	C₁	C₂	B

10 tons	7.5	3.39	50.98	6.49	745	1470	910	2500	1230	1830	2000
	8	3.48	51.78	6.66
	8.5	3.57	52.52	6.83
	9	3.69	53.23	7.03
	9.5	3.77	53.85	7.23
	10	3.87	54.14	7.37
	10.5	3.99	54.99	7.54
	11	4.07	55.93	8.04
	11.5	4.37	56.43	8.222	820	1495	1010	2500			2000
	12	4.46	56.92	8.4
	12.5	4.61	57.38	8.58
	13	4.71	57.87	8.8
	13.5	4.84	58.30	8.99
	14	4.93	58.72	9.17
	14.5	5.10	64.22	9.5	855	1540	1110	3000			2500
	15	5.20	64.48	9.6
	15.5	5.34	65.04	9.7
	16	5.43	65.68	10.184
	16.5	5.53	65.94	10.39
	17	5.63	66.49	10.6
	17.5	5.90	67.36	10.8	865	1600	1160	3000			2500
	18	6.03	67.74	11.01
	18.5	6.13	68.13	11.22
	19	6.24	68.48	12.57
	19.5	6.69	68.91	12.8
	22.5	7.76	71.5	18.4	875	1640	1210	3500	1293	1893	3000